Telephone signal RJ11-TELE2 


 One. Application and Features 
 Lightning protection of telephone signal has a lower limit voltage, fast response characteristics, the transmission line can be induced protection from lightning or other over-voltage surge protection devices being brought to harm. Communication signal lines and equipment for lightning protection, overvoltage protection. Such as program-controlled switching equipment, fax equipment, electronic telephone, alarm generator. Application areas in the lightning protection zone 1-2 
 - Higher rated discharge current, fast response time 
 - With over-current, over voltage, clamp triple protection 
 - Standard connections, small size, light weight, easy installation and maintenance 

 Technical parameters 
 Type RJ11-TELE2 
 UN 110V rated voltage 
 (Maximum continuous operating voltage) UC 170V 
 Nominal discharge current (8/20μs) ISN 2.5KA 
 Transfer rate VS 2M bit / s 
 Working temperature - 40 ℃ - +85 ℃ 
 RJ11 Interface Connection 


 Second, the installation and maintenance: 

 1, the product is connected in series, the series entered in front of the protected equipment, surge arresters input (IN) and the signal path connected to the output (OUT) and connected to the protected equipment entry and exit. 

 2, the installation of lightning protection should be the ground wire of this product with the engine room directly connected to ground lightning. 

 3, the product without special maintenance work when the system fails, then check the product can be removed, if removed to resume normal work after a new surge arresters should be replaced. 

 4, before the thunderstorm season, thunderstorm season, days after the case of short circuit, etc. should be promptly checked the work of the product, and make records, failure timely maintenance by professionals.