Lei Zhenzi triple mine 

 230BC/3D monitoring triple arrester 

 First, the applications and features: 

 230BC/3D triple arrester monitoring system for monitoring power, control signals, BNC video signal of the lightning protection, has a lower limit voltage, fast response characteristics, offering protection from the control lines or other waves induced by lightning Chung, over-voltage protection devices on the harm to be. 



 Second, the technical parameters: 



 Product Type 
 230BC/3D 

 Conservation Project 
 Power 
 BNC Video 
 Control signal 

 Terminals 
 3,4 
 BNC 
 1,2 

 Rated voltage Un 
 24V 
 12V 
 12V 

 Maximum continuous operating voltage Uc 
 36V 
 18V 
 15V 

 Nominal discharge current In 
 5KA 

 Insertion loss ae 
 <0.3dB 

 Rate Vs 
 - 
 16M bit / s 
 2M bit / s 

 Ambient temperature 
 -40 ~ +80 ° C 

 Installation 
 35mm electric rail 

 Module width 
 36mm 




 Third, the installation and maintenance: 

 1, the wiring diagram: 



 Terminals: 1,2 access control signal; 3,4-connected power supply. 

 2, the product is connected in series, the series entered in front of the protected equipment, surge arresters input (IN) is connected with the signal path; output terminal (OUT) and the protected equipment connected to the input signal. 

 3, the installation of lightning protection should be the ground wire of this product with the engine room directly connected to ground lightning. 

 4, the product Needless to special maintenance work when the system fails, then check the product can be removed, if removed to resume normal work after a new surge arresters should be replaced. 

 5, before the thunderstorm season, thunderstorm days, short-circuit such circumstances should be promptly checked the work of the product, and make records, failure timely maintenance by professionals.